diff --git a/.gitignore b/.gitignore
index d019dec3d24efde25aecd28d378e378ad0784026..8b39b6193b8d42369fb7fdd023d078afaf8bf5e9 100644
--- a/.gitignore
+++ b/.gitignore
@@ -39,3 +39,10 @@ tmp*
/ylwrap
/doc/doxyxml
/doc/html
+/daemon/kresolved
+/tests/test_array
+/tests/test_map
+/tests/test_module
+/tests/test_pack
+/tests/test_set
+/tests/test_utils
diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 2099840756e6302d837dcd51b5dcd6262f7adb16..0000000000000000000000000000000000000000
--- a/INSTALL
+++ /dev/null
@@ -1,370 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
- Briefly, the shell command `./configure && make && make install'
-should configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
- The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
-
- 4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation. Until the limitation is lifted, you can use
-this workaround:
-
- CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index e5e48000b77e499789d18ec0b33853adf4a6c982..0000000000000000000000000000000000000000
--- a/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = lib daemon tests
diff --git a/NEWS b/NEWS
deleted file mode 100644
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..0000000000000000000000000000000000000000
diff --git a/THANKS b/THANKS
deleted file mode 100644
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..0000000000000000000000000000000000000000
diff --git a/bootstrap b/bootstrap
deleted file mode 100755
index 7380c307e7983cf4cd35998facceb7bf88960988..0000000000000000000000000000000000000000
--- a/bootstrap
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-set -e
-aclocal -I m4 --install
-libtoolize --copy
-autoheader
-automake --copy --add-missing
-autoconf
diff --git a/configure.ac b/configure.ac
deleted file mode 100644
index 044c38b67d35f97e4eb3dcbd07fec6cbe90c1cb5..0000000000000000000000000000000000000000
--- a/configure.ac
+++ /dev/null
@@ -1,83 +0,0 @@
-AC_PREREQ(2.60)
-
-# Version/identifiers
-m4_define([VERSION_MAJOR],[0])
-m4_define([VERSION_MINOR],[0])
-m4_define([VERSION_MICRO],[2])
-AC_INIT(knot-resolver, m4_defn([VERSION_MAJOR]).m4_defn([VERSION_MINOR]).m4_defn([VERSION_MICRO]), knot-dns@lists.nic.cz, knot-resolver)
-AM_INIT_AUTOMAKE([gnits subdir-objects dist-xz -Wall -Werror])
-AM_SILENT_RULES([yes])
-AC_CONFIG_HEADERS([config.h])
-AC_CONFIG_MACRO_DIR([m4])
-
-# Set compiler compatibility flags
-AC_PROG_CC_C99
-AM_PROG_CC_C_O
-AC_PROG_CPP_WERROR
-
-# Default compiler flags
-CFLAGS="$CFLAGS -Wall -Werror=format-security"
-
-# Checks for programs.
-m4_ifdef([AM_PROG_AR], [AM_PROG_AR]) # call AM_PROG_AR only if available
-
-# Linker
-LT_INIT
-
-# Use pkg-config
-PKG_PROG_PKG_CONFIG
-
-# Platform-specific
-AM_CONDITIONAL([HOST_DARWIN], [test "x${host_os}" != "x${host_os/darwin/}"])
-
-# Check for dependencies
-AC_CHECK_FUNCS([opendir mkdtemp gettimeofday time])
-PKG_CHECK_MODULES([libknot], [libknot])
-PKG_CHECK_MODULES([libuv], [libuv], [build_daemon=yes], [build_daemon=no])
-PKG_CHECK_MODULES([cmocka], [cmocka], [build_tests=yes], [build_tests=no])
-
-# Check for python (integration tests)
-AC_ARG_ENABLE([integration-tests],
- AS_HELP_STRING([--enable-integration-tests], [enable integration tests (require Python devel), default: no]),
- [build_integration=yes], [build_integration=no])
-if test "x${build_integration}" == "xyes"; then
- AX_PYTHON_DEVEL([>= '2.5'])
-fi
-
-# Set up conditionals
-AM_CONDITIONAL([BUILD_TESTS], [test "$build_tests" == "yes"])
-AM_CONDITIONAL([BUILD_INTEGRATION], [test "$build_integration" == "yes"])
-AM_CONDITIONAL([BUILD_DAEMON], [test "$build_daemon" == "yes"])
-
-# Check for code coverage
-AC_ARG_ENABLE([code-coverage],
- AS_HELP_STRING([--enable-code-coverage], [enable code coverage, default: no]),
- [code_coverage=yes], [code_coverage=no])
-if test "x${code_coverage}" == "xyes"; then
- CFLAGS="${CFLAGS} --coverage -O0 -g"
-fi
-
-
-# Search other libraries
-AC_SEARCH_LIBS([mdb_env_open], [lmdb])
-
-# Config files
-AC_CONFIG_FILES([Makefile lib/Makefile tests/Makefile daemon/Makefile])
-
-# Output
-AC_OUTPUT
-AC_MSG_RESULT([
- $PACKAGE $VERSION
-
- Target: $host_os $host_cpu
- Compiler: ${CC}
- CFlags: ${CFLAGS} ${CPPFLAGS} ${libuv_CFLAGS} ${libknot_CFLAGS}
- LDFlags: ${LDFLAGS} ${libuv_LIBS} ${libknot_LIBS}
-
- Features:
- ---------
- Build tests: ${build_tests} (integration ${build_integration})
- Build daemon: ${build_daemon}
-
- Continue with 'make' command
-])
diff --git a/daemon/Makefile.am b/daemon/Makefile.am
deleted file mode 100644
index 5e120579f64956fbc897fd709fef567b7abf9a3e..0000000000000000000000000000000000000000
--- a/daemon/Makefile.am
+++ /dev/null
@@ -1,24 +0,0 @@
-if BUILD_DAEMON
-
-AM_CPPFLAGS = \
- -include $(top_builddir)/config.h \
- -I$(top_srcdir)/lib \
- $(libuv_CFLAGS) \
- $(libknot_CFLAGS)
-
-kresolved_SOURCES = \
- layer/query.h \
- layer/query.c \
- udp.h \
- udp.c \
- tcp.h \
- tcp.c \
- worker.h \
- worker.c \
- main.c
-
-# sbin programs
-sbin_PROGRAMS = kresolved
-kresolved_LDADD = $(top_builddir)/lib/libkresolve.la $(libknot_LIBS) $(libuv_LIBS)
-
-endif
diff --git a/lib/Makefile.am b/lib/Makefile.am
deleted file mode 100644
index ba490c3ddae5dd57b6da79cef304c0432b8170d5..0000000000000000000000000000000000000000
--- a/lib/Makefile.am
+++ /dev/null
@@ -1,29 +0,0 @@
-# Static version of the library
-noinst_LTLIBRARIES = libkresolve_static.la
-libkresolve_static_la_CPPFLAGS = $(AM_CPPFLAGS) $(libknot_CFLAGS) $(libuv_CFLAGS)
-libkresolve_static_la_LDFLAGS = $(AM_LDFLAGS) $(libknot_LIBS) $(libuv_LIBS)
-libkresolve_static_la_SOURCES = \
- layer/iterate.h \
- layer/iterate.c \
- layer/itercache.h \
- layer/itercache.c \
- layer/static.h \
- layer/static.c \
- layer/stats.h \
- layer/stats.c \
- layer.h \
- context.h \
- context.c \
- resolve.h \
- resolve.c \
- zonecut.h \
- zonecut.c \
- rplan.h \
- rplan.c \
- cache.h \
- cache.c
-
-# Shared version (to be installed)
-lib_LTLIBRARIES = libkresolve.la
-libkresolve_la_SOURCES =
-libkresolve_la_LIBADD = libkresolve_static.la
diff --git a/m4/.gitignore b/m4/.gitignore
deleted file mode 100644
index 464ba5caa6814008d91053646b3d634a4323f2e9..0000000000000000000000000000000000000000
--- a/m4/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-libtool.m4
-lt~obsolete.m4
-ltoptions.m4
-ltsugar.m4
-ltversion.m4
diff --git a/m4/ax_python_devel.m4 b/m4/ax_python_devel.m4
deleted file mode 100644
index 59a2ff0903022d90bd0f6f60ddcbc7951ff7276b..0000000000000000000000000000000000000000
--- a/m4/ax_python_devel.m4
+++ /dev/null
@@ -1,324 +0,0 @@
-# ===========================================================================
-# http://www.gnu.org/software/autoconf-archive/ax_python_devel.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-# AX_PYTHON_DEVEL([version])
-#
-# DESCRIPTION
-#
-# Note: Defines as a precious variable "PYTHON_VERSION". Don't override it
-# in your configure.ac.
-#
-# This macro checks for Python and tries to get the include path to
-# 'Python.h'. It provides the $(PYTHON_CPPFLAGS) and $(PYTHON_LDFLAGS)
-# output variables. It also exports $(PYTHON_EXTRA_LIBS) and
-# $(PYTHON_EXTRA_LDFLAGS) for embedding Python in your code.
-#
-# You can search for some particular version of Python by passing a
-# parameter to this macro, for example ">= '2.3.1'", or "== '2.4'". Please
-# note that you *have* to pass also an operator along with the version to
-# match, and pay special attention to the single quotes surrounding the
-# version number. Don't use "PYTHON_VERSION" for this: that environment
-# variable is declared as precious and thus reserved for the end-user.
-#
-# This macro should work for all versions of Python >= 2.1.0. As an end
-# user, you can disable the check for the python version by setting the
-# PYTHON_NOVERSIONCHECK environment variable to something else than the
-# empty string.
-#
-# If you need to use this macro for an older Python version, please
-# contact the authors. We're always open for feedback.
-#
-# LICENSE
-#
-# Copyright (c) 2009 Sebastian Huber <sebastian-huber@web.de>
-# Copyright (c) 2009 Alan W. Irwin
-# Copyright (c) 2009 Rafael Laboissiere <rafael@laboissiere.net>
-# Copyright (c) 2009 Andrew Collier
-# Copyright (c) 2009 Matteo Settenvini <matteo@member.fsf.org>
-# Copyright (c) 2009 Horst Knorr <hk_classes@knoda.org>
-# Copyright (c) 2013 Daniel Mullner <muellner@math.stanford.edu>
-#
-# This program is free software: you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation, either version 3 of the License, or (at your
-# option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-# Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception, the respective Autoconf Macro's copyright owner
-# gives unlimited permission to copy, distribute and modify the configure
-# scripts that are the output of Autoconf when processing the Macro. You
-# need not follow the terms of the GNU General Public License when using
-# or distributing such scripts, even though portions of the text of the
-# Macro appear in them. The GNU General Public License (GPL) does govern
-# all other use of the material that constitutes the Autoconf Macro.
-#
-# This special exception to the GPL applies to versions of the Autoconf
-# Macro released by the Autoconf Archive. When you make and distribute a
-# modified version of the Autoconf Macro, you may extend this special
-# exception to the GPL to apply to your modified version as well.
-
-#serial 17
-
-AU_ALIAS([AC_PYTHON_DEVEL], [AX_PYTHON_DEVEL])
-AC_DEFUN([AX_PYTHON_DEVEL],[
- #
- # Allow the use of a (user set) custom python version
- #
- AC_ARG_VAR([PYTHON_VERSION],[The installed Python
- version to use, for example '2.3'. This string
- will be appended to the Python interpreter
- canonical name.])
-
- AC_PATH_PROG([PYTHON],[python[$PYTHON_VERSION]])
- if test -z "$PYTHON"; then
- AC_MSG_ERROR([Cannot find python$PYTHON_VERSION in your system path])
- PYTHON_VERSION=""
- fi
-
- #
- # Check for a version of Python >= 2.1.0
- #
- AC_MSG_CHECKING([for a version of Python >= '2.1.0'])
- ac_supports_python_ver=`$PYTHON -c "import sys; \
- ver = sys.version.split ()[[0]]; \
- print (ver >= '2.1.0')"`
- if test "$ac_supports_python_ver" != "True"; then
- if test -z "$PYTHON_NOVERSIONCHECK"; then
- AC_MSG_RESULT([no])
- AC_MSG_FAILURE([
-This version of the AC@&t@_PYTHON_DEVEL macro
-doesn't work properly with versions of Python before
-2.1.0. You may need to re-run configure, setting the
-variables PYTHON_CPPFLAGS, PYTHON_LDFLAGS, PYTHON_SITE_PKG,
-PYTHON_EXTRA_LIBS and PYTHON_EXTRA_LDFLAGS by hand.
-Moreover, to disable this check, set PYTHON_NOVERSIONCHECK
-to something else than an empty string.
-])
- else
- AC_MSG_RESULT([skip at user request])
- fi
- else
- AC_MSG_RESULT([yes])
- fi
-
- #
- # if the macro parameter ``version'' is set, honour it
- #
- if test -n "$1"; then
- AC_MSG_CHECKING([for a version of Python $1])
- ac_supports_python_ver=`$PYTHON -c "import sys; \
- ver = sys.version.split ()[[0]]; \
- print (ver $1)"`
- if test "$ac_supports_python_ver" = "True"; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- AC_MSG_ERROR([this package requires Python $1.
-If you have it installed, but it isn't the default Python
-interpreter in your system path, please pass the PYTHON_VERSION
-variable to configure. See ``configure --help'' for reference.
-])
- PYTHON_VERSION=""
- fi
- fi
-
- #
- # Check if you have distutils, else fail
- #
- AC_MSG_CHECKING([for the distutils Python package])
- ac_distutils_result=`$PYTHON -c "import distutils" 2>&1`
- if test -z "$ac_distutils_result"; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- AC_MSG_ERROR([cannot import Python module "distutils".
-Please check your Python installation. The error was:
-$ac_distutils_result])
- PYTHON_VERSION=""
- fi
-
- #
- # Check for Python include path
- #
- AC_MSG_CHECKING([for Python include path])
- if test -z "$PYTHON_CPPFLAGS"; then
- python_path=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_python_inc ());"`
- plat_python_path=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_python_inc (plat_specific=1));"`
- if test -n "${python_path}"; then
- if test "${plat_python_path}" != "${python_path}"; then
- python_path="-I$python_path -I$plat_python_path"
- else
- python_path="-I$python_path"
- fi
- fi
- PYTHON_CPPFLAGS=$python_path
- fi
- AC_MSG_RESULT([$PYTHON_CPPFLAGS])
- AC_SUBST([PYTHON_CPPFLAGS])
-
- #
- # Check for Python library path
- #
- AC_MSG_CHECKING([for Python library path])
- if test -z "$PYTHON_LDFLAGS"; then
- # (makes two attempts to ensure we've got a version number
- # from the interpreter)
- ac_python_version=`cat<<EOD | $PYTHON -
-
-# join all versioning strings, on some systems
-# major/minor numbers could be in different list elements
-from distutils.sysconfig import *
-e = get_config_var('VERSION')
-if e is not None:
- print(e)
-EOD`
-
- if test -z "$ac_python_version"; then
- if test -n "$PYTHON_VERSION"; then
- ac_python_version=$PYTHON_VERSION
- else
- ac_python_version=`$PYTHON -c "import sys; \
- print (sys.version[[:3]])"`
- fi
- fi
-
- # Make the versioning information available to the compiler
- AC_DEFINE_UNQUOTED([HAVE_PYTHON], ["$ac_python_version"],
- [If available, contains the Python version number currently in use.])
-
- # First, the library directory:
- ac_python_libdir=`cat<<EOD | $PYTHON -
-
-# There should be only one
-import distutils.sysconfig
-e = distutils.sysconfig.get_config_var('LIBDIR')
-if e is not None:
- print (e)
-EOD`
-
- # Now, for the library:
- ac_python_library=`cat<<EOD | $PYTHON -
-
-import distutils.sysconfig
-c = distutils.sysconfig.get_config_vars()
-if 'LDVERSION' in c:
- print ('python'+c[['LDVERSION']])
-else:
- print ('python'+c[['VERSION']])
-EOD`
-
- # This small piece shamelessly adapted from PostgreSQL python macro;
- # credits goes to momjian, I think. I'd like to put the right name
- # in the credits, if someone can point me in the right direction... ?
- #
- if test -n "$ac_python_libdir" -a -n "$ac_python_library"
- then
- # use the official shared library
- ac_python_library=`echo "$ac_python_library" | sed "s/^lib//"`
- PYTHON_LDFLAGS="-L$ac_python_libdir -l$ac_python_library"
- else
- # old way: use libpython from python_configdir
- ac_python_libdir=`$PYTHON -c \
- "from distutils.sysconfig import get_python_lib as f; \
- import os; \
- print (os.path.join(f(plat_specific=1, standard_lib=1), 'config'));"`
- PYTHON_LDFLAGS="-L$ac_python_libdir -lpython$ac_python_version"
- fi
-
- if test -z "PYTHON_LDFLAGS"; then
- AC_MSG_ERROR([
- Cannot determine location of your Python DSO. Please check it was installed with
- dynamic libraries enabled, or try setting PYTHON_LDFLAGS by hand.
- ])
- fi
- fi
- AC_MSG_RESULT([$PYTHON_LDFLAGS])
- AC_SUBST([PYTHON_LDFLAGS])
-
- #
- # Check for site packages
- #
- AC_MSG_CHECKING([for Python site-packages path])
- if test -z "$PYTHON_SITE_PKG"; then
- PYTHON_SITE_PKG=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_python_lib(0,0));"`
- fi
- AC_MSG_RESULT([$PYTHON_SITE_PKG])
- AC_SUBST([PYTHON_SITE_PKG])
-
- #
- # libraries which must be linked in when embedding
- #
- AC_MSG_CHECKING(python extra libraries)
- if test -z "$PYTHON_EXTRA_LIBS"; then
- PYTHON_EXTRA_LIBS=`$PYTHON -c "import distutils.sysconfig; \
- conf = distutils.sysconfig.get_config_var; \
- print (conf('LIBS') + ' ' + conf('SYSLIBS'))"`
- fi
- AC_MSG_RESULT([$PYTHON_EXTRA_LIBS])
- AC_SUBST(PYTHON_EXTRA_LIBS)
-
- #
- # linking flags needed when embedding
- #
- AC_MSG_CHECKING(python extra linking flags)
- if test -z "$PYTHON_EXTRA_LDFLAGS"; then
- PYTHON_EXTRA_LDFLAGS=`$PYTHON -c "import distutils.sysconfig; \
- conf = distutils.sysconfig.get_config_var; \
- print (conf('LINKFORSHARED'))"`
- fi
- AC_MSG_RESULT([$PYTHON_EXTRA_LDFLAGS])
- AC_SUBST(PYTHON_EXTRA_LDFLAGS)
-
- #
- # final check to see if everything compiles alright
- #
- AC_MSG_CHECKING([consistency of all components of python development environment])
- # save current global flags
- ac_save_LIBS="$LIBS"
- ac_save_CPPFLAGS="$CPPFLAGS"
- LIBS="$ac_save_LIBS $PYTHON_LDFLAGS $PYTHON_EXTRA_LDFLAGS $PYTHON_EXTRA_LIBS"
- CPPFLAGS="$ac_save_CPPFLAGS $PYTHON_CPPFLAGS"
- AC_LANG_PUSH([C])
- AC_LINK_IFELSE([
- AC_LANG_PROGRAM([[#include <Python.h>]],
- [[Py_Initialize();]])
- ],[pythonexists=yes],[pythonexists=no])
- AC_LANG_POP([C])
- # turn back to default flags
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIBS="$ac_save_LIBS"
-
- AC_MSG_RESULT([$pythonexists])
-
- if test ! "x$pythonexists" = "xyes"; then
- AC_MSG_FAILURE([
- Could not link test program to Python. Maybe the main Python library has been
- installed in some non-standard library path. If so, pass it to configure,
- via the LDFLAGS environment variable.
- Example: ./configure LDFLAGS="-L/usr/non-standard-path/python/lib"
- ============================================================================
- ERROR!
- You probably have to install the development version of the Python package
- for your distribution. The exact name of this package varies among them.
- ============================================================================
- ])
- PYTHON_VERSION=""
- fi
-
- #
- # all done!
- #
-])
diff --git a/tests/Makefile.am b/tests/Makefile.am
deleted file mode 100644
index 0139d1af9e76a6d81ccb08db90147a8dceac5963..0000000000000000000000000000000000000000
--- a/tests/Makefile.am
+++ /dev/null
@@ -1,71 +0,0 @@
-AM_CPPFLAGS = \
- -include $(top_builddir)/config.h \
- -I$(top_srcdir)/lib \
- $(libknot_CFLAGS) \
- $(cmocka_CFLAGS)
-
-LDADD = \
- $(top_builddir)/lib/libkresolve_static.la \
- $(libknot_LIBS) \
- $(cmocka_LIBS)
-
-# Unit tests
-if BUILD_TESTS
-
-check_PROGRAMS = \
- test_context \
- test_rplan \
- test_cache \
- test_resolve
-
-check-compile-only: $(check_PROGRAMS)
-check-local-exec: $(check_PROGRAMS)
- @echo "---- Executing unit tests ----"
- @cd $(top_builddir)
- $(top_builddir)/tests/runtests -b $(top_builddir)/tests $(check_PROGRAMS)
-
-else
-
-check-local-exec:
-
-endif
-
-# Integration tests
-if BUILD_INTEGRATION
-
-check_LTLIBRARIES = libmock_calls.la _test_integration.la
-
-libmock_calls_la_SOURCES = mock_calls.c
-libmock_calls_la_CPPFLAGS = $(AM_CPPFLAGS) $(PYTHON_CPPFLAGS)
-libmock_calls_la_LDFLAGS = $(LDFLAGS) -rpath $(abs_builddir)/tests -shared -avoid-version
-libmock_calls_la_LIBADD = $(libknot_LIBS) $(top_builddir)/lib/libkresolve_static.la $(PYTHON_LIBS)
-
-_test_integration_la_SOURCES = test_integration.c
-_test_integration_la_CPPFLAGS = $(AM_CPPFLAGS) $(PYTHON_CPPFLAGS)
-_test_integration_la_LDFLAGS = $(LDFLAGS) -rpath $(abs_builddir) -module -shared -avoid-version
-_test_integration_la_LIBADD = libmock_calls.la $(PYTHON_LIBS)
-
-check_cmd = $(abs_builddir)/test_integration.py testdata
-
-convenience-link: $(check_LTLIBRARIES)
- for soname in `echo | $(EGREP) "^dlname=" $(check_LTLIBRARIES) | $(SED) -e "s|\(.*\)dlname='\(.*\)'|\2|"`; do \
- rm -f $(abs_builddir)/$$soname; $(LN_S) $(abs_builddir)/.libs/$$soname $$soname || true;\
- done
-
-check-local-integration: convenience-link
- @echo "---- Executing integration tests ----"
-if HOST_DARWIN
- @DYLD_FORCE_FLAT_NAMESPACE=1 DYLD_LIBRARY_PATH=$(abs_builddir)/.libs DYLD_INSERT_LIBRARIES=$(abs_builddir)/.libs/libmock_calls.dylib $(check_cmd)
-else
- @LD_PRELOAD=$(abs_builddir)/.libs/libmock_calls.so $(check_cmd)
-endif
-
-clean-local:
- rm -f *.so *.dylib || true
-else
-
-check-local-integration:
-
-endif
-
-check-local: check-local-exec check-local-integration