Commit 46d8929d authored by Marek Vavruša's avatar Marek Vavruša
Browse files

build: removed outdated autotools files

parent da3d8e50
Installation Instructions
*************************
Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
Briefly, the shell command `./configure && make && make install'
should configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX `make' updates targets which have the same time stamps as
their prerequisites, which makes it generally unusable when shipped
generated files such as `configure' are involved. Use GNU `make'
instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf limitation. Until the limitation is lifted, you can use
this workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = lib daemon tests
#!/bin/sh
set -e
aclocal -I m4 --install
libtoolize --copy
autoheader
automake --copy --add-missing
autoconf
AC_PREREQ(2.60)
# Version/identifiers
m4_define([VERSION_MAJOR],[0])
m4_define([VERSION_MINOR],[0])
m4_define([VERSION_MICRO],[2])
AC_INIT(knot-resolver, m4_defn([VERSION_MAJOR]).m4_defn([VERSION_MINOR]).m4_defn([VERSION_MICRO]), knot-dns@lists.nic.cz, knot-resolver)
AM_INIT_AUTOMAKE([gnits subdir-objects dist-xz -Wall -Werror])
AM_SILENT_RULES([yes])
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_MACRO_DIR([m4])
# Set compiler compatibility flags
AC_PROG_CC_C99
AM_PROG_CC_C_O
AC_PROG_CPP_WERROR
# Default compiler flags
CFLAGS="$CFLAGS -Wall -Werror=format-security"
# Checks for programs.
m4_ifdef([AM_PROG_AR], [AM_PROG_AR]) # call AM_PROG_AR only if available
# Linker
LT_INIT
# Use pkg-config
PKG_PROG_PKG_CONFIG
# Platform-specific
AM_CONDITIONAL([HOST_DARWIN], [test "x${host_os}" != "x${host_os/darwin/}"])
# Check for dependencies
AC_CHECK_FUNCS([opendir mkdtemp gettimeofday time])
PKG_CHECK_MODULES([libknot], [libknot])
PKG_CHECK_MODULES([libuv], [libuv], [build_daemon=yes], [build_daemon=no])
PKG_CHECK_MODULES([cmocka], [cmocka], [build_tests=yes], [build_tests=no])
# Check for python (integration tests)
AC_ARG_ENABLE([integration-tests],
AS_HELP_STRING([--enable-integration-tests], [enable integration tests (require Python devel), default: no]),
[build_integration=yes], [build_integration=no])
if test "x${build_integration}" == "xyes"; then
AX_PYTHON_DEVEL([>= '2.5'])
fi
# Set up conditionals
AM_CONDITIONAL([BUILD_TESTS], [test "$build_tests" == "yes"])
AM_CONDITIONAL([BUILD_INTEGRATION], [test "$build_integration" == "yes"])
AM_CONDITIONAL([BUILD_DAEMON], [test "$build_daemon" == "yes"])
# Check for code coverage
AC_ARG_ENABLE([code-coverage],
AS_HELP_STRING([--enable-code-coverage], [enable code coverage, default: no]),
[code_coverage=yes], [code_coverage=no])
if test "x${code_coverage}" == "xyes"; then
CFLAGS="${CFLAGS} --coverage -O0 -g"
fi
# Search other libraries
AC_SEARCH_LIBS([mdb_env_open], [lmdb])
# Config files
AC_CONFIG_FILES([Makefile lib/Makefile tests/Makefile daemon/Makefile])
# Output
AC_OUTPUT
AC_MSG_RESULT([
$PACKAGE $VERSION
Target: $host_os $host_cpu
Compiler: ${CC}
CFlags: ${CFLAGS} ${CPPFLAGS} ${libuv_CFLAGS} ${libknot_CFLAGS}
LDFlags: ${LDFLAGS} ${libuv_LIBS} ${libknot_LIBS}
Features:
---------
Build tests: ${build_tests} (integration ${build_integration})
Build daemon: ${build_daemon}
Continue with 'make' command
])
if BUILD_DAEMON
AM_CPPFLAGS = \
-include $(top_builddir)/config.h \
-I$(top_srcdir)/lib \
$(libuv_CFLAGS) \
$(libknot_CFLAGS)
kresolved_SOURCES = \
layer/query.h \
layer/query.c \
udp.h \
udp.c \
tcp.h \
tcp.c \
worker.h \
worker.c \
main.c
# sbin programs
sbin_PROGRAMS = kresolved
kresolved_LDADD = $(top_builddir)/lib/libkresolve.la $(libknot_LIBS) $(libuv_LIBS)
endif
# Static version of the library
noinst_LTLIBRARIES = libkresolve_static.la
libkresolve_static_la_CPPFLAGS = $(AM_CPPFLAGS) $(libknot_CFLAGS) $(libuv_CFLAGS)
libkresolve_static_la_LDFLAGS = $(AM_LDFLAGS) $(libknot_LIBS) $(libuv_LIBS)
libkresolve_static_la_SOURCES = \
layer/iterate.h \
layer/iterate.c \
layer/itercache.h \
layer/itercache.c \
layer/static.h \
layer/static.c \
layer/stats.h \
layer/stats.c \
layer.h \
context.h \
context.c \
resolve.h \
resolve.c \
zonecut.h \
zonecut.c \
rplan.h \
rplan.c \
cache.h \
cache.c
# Shared version (to be installed)
lib_LTLIBRARIES = libkresolve.la
libkresolve_la_SOURCES =
libkresolve_la_LIBADD = libkresolve_static.la
libtool.m4
lt~obsolete.m4
ltoptions.m4
ltsugar.m4
ltversion.m4
# ===========================================================================
# http://www.gnu.org/software/autoconf-archive/ax_python_devel.html
# ===========================================================================
#
# SYNOPSIS
#
# AX_PYTHON_DEVEL([version])
#
# DESCRIPTION
#
# Note: Defines as a precious variable "PYTHON_VERSION". Don't override it
# in your configure.ac.
#
# This macro checks for Python and tries to get the include path to
# 'Python.h'. It provides the $(PYTHON_CPPFLAGS) and $(PYTHON_LDFLAGS)
# output variables. It also exports $(PYTHON_EXTRA_LIBS) and
# $(PYTHON_EXTRA_LDFLAGS) for embedding Python in your code.
#
# You can search for some particular version of Python by passing a
# parameter to this macro, for example ">= '2.3.1'", or "== '2.4'". Please
# note that you *have* to pass also an operator along with the version to
# match, and pay special attention to the single quotes surrounding the
# version number. Don't use "PYTHON_VERSION" for this: that environment
# variable is declared as precious and thus reserved for the end-user.
#
# This macro should work for all versions of Python >= 2.1.0. As an end
# user, you can disable the check for the python version by setting the
# PYTHON_NOVERSIONCHECK environment variable to something else than the
# empty string.
#
# If you need to use this macro for an older Python version, please
# contact the authors. We're always open for feedback.
#
# LICENSE
#
# Copyright (c) 2009 Sebastian Huber <sebastian-huber@web.de>
# Copyright (c) 2009 Alan W. Irwin
# Copyright (c) 2009 Rafael Laboissiere <rafael@laboissiere.net>
# Copyright (c) 2009 Andrew Collier
# Copyright (c) 2009 Matteo Settenvini <matteo@member.fsf.org>
# Copyright (c) 2009 Horst Knorr <hk_classes@knoda.org>
# Copyright (c) 2013 Daniel Mullner <muellner@math.stanford.edu>
#
# This program is free software: you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation, either version 3 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
#
# As a special exception, the respective Autoconf Macro's copyright owner
# gives unlimited permission to copy, distribute and modify the configure
# scripts that are the output of Autoconf when processing the Macro. You
# need not follow the terms of the GNU General Public License when using
# or distributing such scripts, even though portions of the text of the
# Macro appear in them. The GNU General Public License (GPL) does govern
# all other use of the material that constitutes the Autoconf Macro.
#
# This special exception to the GPL applies to versions of the Autoconf
# Macro released by the Autoconf Archive. When you make and distribute a
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
#serial 17
AU_ALIAS([AC_PYTHON_DEVEL], [AX_PYTHON_DEVEL])
AC_DEFUN([AX_PYTHON_DEVEL],[
#
# Allow the use of a (user set) custom python version
#
AC_ARG_VAR([PYTHON_VERSION],[The installed Python
version to use, for example '2.3'. This string
will be appended to the Python interpreter
canonical name.])
AC_PATH_PROG([PYTHON],[python[$PYTHON_VERSION]])
if test -z "$PYTHON"; then
AC_MSG_ERROR([Cannot find python$PYTHON_VERSION in your system path])
PYTHON_VERSION=""
fi
#
# Check for a version of Python >= 2.1.0
#
AC_MSG_CHECKING([for a version of Python >= '2.1.0'])
ac_supports_python_ver=`$PYTHON -c "import sys; \
ver = sys.version.split ()[[0]]; \
print (ver >= '2.1.0')"`
if test "$ac_supports_python_ver" != "True"; then
if test -z "$PYTHON_NOVERSIONCHECK"; then
AC_MSG_RESULT([no])
AC_MSG_FAILURE([
This version of the AC@&t@_PYTHON_DEVEL macro
doesn't work properly with versions of Python before
2.1.0. You may need to re-run configure, setting the
variables PYTHON_CPPFLAGS, PYTHON_LDFLAGS, PYTHON_SITE_PKG,
PYTHON_EXTRA_LIBS and PYTHON_EXTRA_LDFLAGS by hand.