lxc: network is not configured in default
We should provide default LXC network configuration that would be connected to LAN. At the moment there is no default configuration and containers start without network.
As an example Alpine edge:
lxc-start: alpine: utils.c: safe_mount: 1707 No such file or directory - Failed to mount /usr/lib/lxc/rootfs/proc/tty onto /usr/lib/lxc/rootfs/proc/sys/net
OpenRC 0.41.2.f4b2a85138 is starting up Linux 4.14.111 (aarch64) [LXC]
* /proc is already mounted
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Wiping /tmp directory ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting busybox crond ... [ ok ]
* Starting networking ... * eth0 ...ip: ioctl 0x8913 failed: No such device
[ !! ]
* ERROR: networking failed to start
Welcome to Alpine Linux 3.8
Kernel 4.14.111 on an aarch64 (/dev/console)
alpine login: root
Welcome to Alpine!
The Alpine Wiki contains a large amount of how-to guides and general
information about administrating Alpine systems.
See <http://wiki.alpinelinux.org/>.
You can setup the system with the command: setup-alpine
You may change this message by editing /etc/motd.
alpine:~# ip l
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN qlen 1000
link/tunnel6 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 brd 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
alpine:~#