0026-libiconv-full-Update-to-version-116.patch

--LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+# _LT_FORMAT_COMMENT([COMMENT])
-+# -----------------------------
-+# Add leading comment marks to the start of each line, and a trailing
-+# full-stop to the whole comment if one is not present already.
-+m4_define([_LT_FORMAT_COMMENT],
-+[m4_ifval([$1], [
-+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-+)])
- 
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
- 
- 
--# _LT_CC_BASENAME(CC)
--# -------------------
--# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
--AC_DEFUN([_LT_CC_BASENAME],
--[for cc_temp in $1""; do
--  case $cc_temp in
--    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
--    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
--    \-*) ;;
--    *) break;;
--  esac
--done
--cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+## ------------------------ ##
-+## FIXME: Eliminate VARNAME ##
-+## ------------------------ ##
-+
-+
-+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-+# -------------------------------------------------------------------
-+# CONFIGNAME is the name given to the value in the libtool script.
-+# VARNAME is the (base) name used in the configure script.
-+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-+# VARNAME.  Any other value will be used directly.
-+m4_define([_LT_DECL],
-+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-+	[m4_ifval([$1], [$1], [$2])])
-+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-+    m4_ifval([$4],
-+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-+    lt_dict_add_subkey([lt_decl_dict], [$2],
-+	[tagged?], [m4_ifval([$5], [yes], [no])])])
- ])
- 
- 
--# _LT_COMPILER_BOILERPLATE
--# ------------------------
--# Check for compiler boilerplate output or warnings with
--# the simple compiler test code.
--AC_DEFUN([_LT_COMPILER_BOILERPLATE],
--[ac_outfile=conftest.$ac_objext
--printf "$lt_simple_compile_test_code" >conftest.$ac_ext
--eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
--_lt_compiler_boilerplate=`cat conftest.err`
--$rm conftest*
--])# _LT_COMPILER_BOILERPLATE
--
-+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-+# --------------------------------------------------------
-+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-+
-+
-+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-+# ------------------------------------------------
-+m4_define([lt_decl_tag_varnames],
-+[_lt_decl_filter([tagged?], [yes], $@)])
-+
-+
-+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-+# ---------------------------------------------------------
-+m4_define([_lt_decl_filter],
-+[m4_case([$#],
-+  [0], [m4_fatal([$0: too few arguments: $#])],
-+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-+])
- 
--# _LT_LINKER_BOILERPLATE
--# ----------------------
--# Check for linker boilerplate output or warnings with
--# the simple link test code.
--AC_DEFUN([_LT_LINKER_BOILERPLATE],
--[ac_outfile=conftest.$ac_objext
--printf "$lt_simple_link_test_code" >conftest.$ac_ext
--eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
--_lt_linker_boilerplate=`cat conftest.err`
--$rm conftest*
--])# _LT_LINKER_BOILERPLATE
- 
-+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-+# --------------------------------------------------
-+m4_define([lt_decl_quote_varnames],
-+[_lt_decl_filter([value], [1], $@)])
-+
-+
-+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-+# ---------------------------------------------------
-+m4_define([lt_decl_dquote_varnames],
-+[_lt_decl_filter([value], [2], $@)])
-+
-+
-+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-+# ---------------------------------------------------
-+m4_define([lt_decl_varnames_tagged],
-+[_$0(m4_quote(m4_default([$1], [[, ]])),
-+     m4_quote(m4_if([$2], [],
-+		     m4_quote(lt_decl_tag_varnames),
-+		  m4_quote(m4_shift($@)))),
-+     m4_split(m4_normalize(m4_quote(_LT_TAGS))))])
-+m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)])
-+
-+
-+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-+# ------------------------------------------------
-+m4_define([lt_decl_all_varnames],
-+[_$0(m4_quote(m4_default([$1], [[, ]])),
-+     m4_if([$2], [],
-+	   m4_quote(lt_decl_varnames),
-+	m4_quote(m4_shift($@))))[]dnl
-+])
-+m4_define([_lt_decl_all_varnames],
-+[lt_join($@, lt_decl_varnames_tagged([$1],
-+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-+])
- 
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
- 
-+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-+# ------------------------------------
-+# Quote a variable value, and forward it to `config.status' so that its
-+# declaration there will have the same value as in `configure'.  VARNAME
-+# must have a single quote delimited value for this to work.
-+m4_define([_LT_CONFIG_STATUS_DECLARE],
-+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
- 
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
--	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
--	 [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
- 
-+# _LT_CONFIG_STATUS_DECLARATIONS
-+# ------------------------------
-+# We delimit libtool config variables with single quotes, so when
-+# we write them to config.status, we have to be sure to quote all
-+# embedded single quotes properly.  In configure, this macro expands
-+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-+#
-+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
-+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
- 
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
- 
--case X$ECHO in
--X*--fallback-echo)
--  # Remove one level of quotation (which was required for Make).
--  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
--  ;;
--esac
-+# _LT_LIBTOOL_TAGS
-+# ----------------
-+# Output comment and list of tags supported by the script
-+m4_defun([_LT_LIBTOOL_TAGS],
-+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-+available_tags="_LT_TAGS"dnl
-+])
- 
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
--  # Discard the --no-reexec flag, and continue.
--  shift
--elif test "X[$]1" = X--fallback-echo; then
--  # Avoid inline document here, it may be left over
--  :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
--  # Yippee, $echo works!
--  :
--else
--  # Restart under the correct shell.
--  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
- 
--if test "X[$]1" = X--fallback-echo; then
--  # used as fallback echo
--  shift
--  cat <<EOF
--[$]*
--EOF
--  exit 0
--fi
-+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-+# -----------------------------------
-+# Extract the dictionary values for VARNAME (optionally with TAG) and
-+# expand to a commented shell variable setting:
-+#
-+#    # Some comment about what VAR is for.
-+#    visible_name=$lt_internal_name
-+m4_define([_LT_LIBTOOL_DECLARE],
-+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-+					   [description])))[]dnl
-+m4_pushdef([_libtool_name],
-+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-+    [0], [_libtool_name=[$]$1],
-+    [1], [_libtool_name=$lt_[]$1],
-+    [2], [_libtool_name=$lt_[]$1],
-+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-+])
- 
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
- 
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
--  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
--    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
--    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
--       echo_test_string=`eval $cmd` &&
--       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
--    then
--      break
--    fi
--  done
--fi
-+# _LT_LIBTOOL_CONFIG_VARS
-+# -----------------------
-+# Produce commented declarations of non-tagged libtool config variables
-+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-+# section) are produced by _LT_LIBTOOL_TAG_VARS.
-+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-+[m4_foreach([_lt_var],
-+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
- 
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
--   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
--   test "X$echo_testing_string" = "X$echo_test_string"; then
--  :
--else
--  # The Solaris, AIX, and Digital Unix default echo programs unquote
--  # backslashes.  This makes it impossible to quote backslashes using
--  #   echo "$something" | sed 's/\\/\\\\/g'
--  #
--  # So, first we look for a working echo in the user's PATH.
- 
--  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--  for dir in $PATH /usr/ucb; do
--    IFS="$lt_save_ifs"
--    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
--       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
--       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
--       test "X$echo_testing_string" = "X$echo_test_string"; then
--      echo="$dir/echo"
--      break
--    fi
--  done
--  IFS="$lt_save_ifs"
-+# _LT_LIBTOOL_TAG_VARS(TAG)
-+# -------------------------
-+m4_define([_LT_LIBTOOL_TAG_VARS],
-+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
- 
--  if test "X$echo" = Xecho; then
--    # We didn't find a better echo, so look for alternatives.
--    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
--       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
--       test "X$echo_testing_string" = "X$echo_test_string"; then
--      # This shell has a builtin print -r that does the trick.
--      echo='print -r'
--    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
--	 test "X$CONFIG_SHELL" != X/bin/ksh; then
--      # If we have ksh, try running configure again with it.
--      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
--      export ORIGINAL_CONFIG_SHELL
--      CONFIG_SHELL=/bin/ksh
--      export CONFIG_SHELL
--      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
--    else
--      # Try using printf.
--      echo='printf %s\n'
--      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
--	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
--	 test "X$echo_testing_string" = "X$echo_test_string"; then
--	# Cool, printf works
--	:
--      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
--	   test "X$echo_testing_string" = 'X\t' &&
--	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
--	   test "X$echo_testing_string" = "X$echo_test_string"; then
--	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
--	export CONFIG_SHELL
--	SHELL="$CONFIG_SHELL"
--	export SHELL
--	echo="$CONFIG_SHELL [$]0 --fallback-echo"
--      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
--	   test "X$echo_testing_string" = 'X\t' &&
--	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
--	   test "X$echo_testing_string" = "X$echo_test_string"; then
--	echo="$CONFIG_SHELL [$]0 --fallback-echo"
--      else
--	# maybe with a smaller string...
--	prev=:
- 
--	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
--	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
--	  then
--	    break
--	  fi
--	  prev="$cmd"
--	done
-+# _LT_TAGVAR(VARNAME, [TAGNAME])
-+# ------------------------------
-+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
- 
--	if test "$prev" != 'sed 50q "[$]0"'; then
--	  echo_test_string=`eval $prev`
--	  export echo_test_string
--	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
--	else
--	  # Oops.  We lost completely, so just stick with echo.
--	  echo=echo
--	fi
--      fi
--    fi
--  fi
--fi
--fi
- 
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
--   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
-+# _LT_CONFIG_COMMANDS
-+# -------------------
-+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-+# variables for single and double quote escaping we saved from calls
-+# to _LT_DECL, we can put quote escaped variables declarations
-+# into `config.status', and then the shell code to quote escape them in
-+# for loops in `config.status'.  Finally, any additional code accumulated
-+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-+m4_defun([_LT_CONFIG_COMMANDS],
-+[AC_PROVIDE_IFELSE([LT_OUTPUT],
-+	dnl If the libtool generation code has been placed in $CONFIG_LT,
-+	dnl instead of duplicating it all over again into config.status,
-+	dnl then we will have config.status run $CONFIG_LT later, so it
-+	dnl needs to know what name is stored there:
-+        [AC_CONFIG_COMMANDS([libtool],
-+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-+    dnl If the libtool generation code is destined for config.status,
-+    dnl expand the accumulated commands and init code now:
-+    [AC_CONFIG_COMMANDS([libtool],
-+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-+])#_LT_CONFIG_COMMANDS
- 
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
- 
-+# Initialize.
-+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-+[
- 
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
--    [AC_HELP_STRING([--disable-libtool-lock],
--	[avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
- 
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
--  # Find out which ABI we are using.
--  echo 'int i;' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case `/usr/bin/file conftest.$ac_objext` in
--    *ELF-32*)
--      HPUX_IA64_MODE="32"
--      ;;
--    *ELF-64*)
--      HPUX_IA64_MODE="64"
--      ;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
--*-*-irix6*)
--  # Find out which ABI we are using.
--  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--   if test "$lt_cv_prog_gnu_ld" = yes; then
--    case `/usr/bin/file conftest.$ac_objext` in
--    *32-bit*)
--      LD="${LD-ld} -melf32bsmip"
--      ;;
--    *N32*)
--      LD="${LD-ld} -melf32bmipn32"
-+sed_quote_subst='$sed_quote_subst'
-+double_quote_subst='$double_quote_subst'
-+delay_variable_subst='$delay_variable_subst'
-+_LT_CONFIG_STATUS_DECLARATIONS
-+LTCC='$LTCC'
-+LTCFLAGS='$LTCFLAGS'
-+compiler='$compiler_DEFAULT'
-+
-+# Quote evaled strings.
-+for var in lt_decl_all_varnames([[ \
-+]], lt_decl_quote_varnames); do
-+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-+    *[[\\\\\\\`\\"\\\$]]*)
-+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-       ;;
--    *64-bit*)
--      LD="${LD-ld} -melf64bmip"
-+    *)
-+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-       ;;
-     esac
--   else
--    case `/usr/bin/file conftest.$ac_objext` in
--    *32-bit*)
--      LD="${LD-ld} -32"
--      ;;
--    *N32*)
--      LD="${LD-ld} -n32"
-+done
-+
-+# Double-quote double-evaled strings.
-+for var in lt_decl_all_varnames([[ \
-+]], lt_decl_dquote_varnames); do
-+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-+    *[[\\\\\\\`\\"\\\$]]*)
-+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-       ;;
--    *64-bit*)
--      LD="${LD-ld} -64"
-+    *)
-+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-       ;;
-     esac
--   fi
--  fi
--  rm -rf conftest*
-+done
-+
-+# Fix-up fallback echo if it was mangled by the above quoting rules.
-+case \$lt_ECHO in
-+*'\\\[$]0 --fallback-echo"')dnl "
-+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-   ;;
-+esac
- 
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
--  # Find out which ABI we are using.
--  echo 'int i;' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case `/usr/bin/file conftest.o` in
--    *32-bit*)
--      case $host in
--        x86_64-*linux*)
--          LD="${LD-ld} -m elf_i386"
--          ;;
--        ppc64-*linux*|powerpc64-*linux*)
--          LD="${LD-ld} -m elf32ppclinux"
--          ;;
--        s390x-*linux*)
--          LD="${LD-ld} -m elf_s390"
--          ;;
--        sparc64-*linux*)
--          LD="${LD-ld} -m elf32_sparc"
--          ;;
--      esac
--      ;;
--    *64-bit*)
--      case $host in
--        x86_64-*linux*)
--          LD="${LD-ld} -m elf_x86_64"
--          ;;
--        ppc*-*linux*|powerpc*-*linux*)
--          LD="${LD-ld} -m elf64ppc"
--          ;;
--        s390*-*linux*)
--          LD="${LD-ld} -m elf64_s390"
--          ;;
--        sparc*-*linux*)
--          LD="${LD-ld} -m elf64_sparc"
--          ;;
--      esac
--      ;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
-+_LT_OUTPUT_LIBTOOL_INIT
-+])
- 
--*-*-sco3.2v5*)
--  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
--  SAVE_CFLAGS="$CFLAGS"
--  CFLAGS="$CFLAGS -belf"
--  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
--    [AC_LANG_PUSH(C)
--     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
--     AC_LANG_POP])
--  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
--    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
--    CFLAGS="$SAVE_CFLAGS"
--  fi
--  ;;
--sparc*-*solaris*)
--  # Find out which ABI we are using.
--  echo 'int i;' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case `/usr/bin/file conftest.o` in
--    *64-bit*)
--      case $lt_cv_prog_gnu_ld in
--      yes*) LD="${LD-ld} -m elf64_sparc" ;;
--      *)    LD="${LD-ld} -64" ;;
--      esac
--      ;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
- 
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
--  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
--  AC_CHECK_TOOL(AS, as, false)
--  AC_CHECK_TOOL(OBJDUMP, objdump, false)
--  ;;
--  ])
--esac
-+# LT_OUTPUT
-+# ---------
-+# This macro allows early generation of the libtool script (before
-+# AC_OUTPUT is called), incase it is used in configure for compilation
-+# tests.
-+AC_DEFUN([LT_OUTPUT],
-+[: ${CONFIG_LT=./config.lt}
-+AC_MSG_NOTICE([creating $CONFIG_LT])
-+cat >"$CONFIG_LT" <<_LTEOF
-+#! $SHELL
-+# Generated by $as_me.
-+# Run this file to recreate a libtool stub with the current configuration.
-+
-+lt_cl_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_LTEOF
-+
-+cat >>"$CONFIG_LT" <<\_LTEOF
-+AS_SHELL_SANITIZE
-+_AS_PREPARE
- 
--need_locks="$enable_libtool_lock"
-+exec AS_MESSAGE_FD>&1
-+exec AS_MESSAGE_LOG_FD>>config.log
-+{
-+  echo
-+  AS_BOX([Running $as_me.])
-+} >&AS_MESSAGE_LOG_FD
-+
-+lt_cl_help="\
-+\`$as_me' creates a local libtool stub from the current configuration,
-+for use in further configure time tests before the real libtool is
-+generated.
-+
-+Usage: $[0] [[OPTIONS]]
-+
-+  -h, --help      print this help, then exit
-+  -V, --version   print version number, then exit
-+  -q, --quiet     do not print progress messages
-+  -d, --debug     don't remove temporary files
-+
-+Report bugs to <bug-libtool@gnu.org>."
-+
-+lt_cl_version="\
-+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-+configured by $[0], generated by m4_PACKAGE_STRING.
-+
-+Copyright (C) 2008 Free Software Foundation, Inc.
-+This config.lt script is free software; the Free Software Foundation
-+gives unlimited permision to copy, distribute and modify it."
- 
--])# _LT_AC_LOCK
-+while test $[#] != 0
-+do
-+  case $[1] in
-+    --version | --v* | -V )
-+      echo "$lt_cl_version"; exit 0 ;;
-+    --help | --h* | -h )
-+      echo "$lt_cl_help"; exit 0 ;;
-+    --debug | --d* | -d )
-+      debug=: ;;
-+    --quiet | --q* | --silent | --s* | -q )
-+      lt_cl_silent=: ;;
- 
-+    -*) AC_MSG_ERROR([unrecognized option: $[1]
-+Try \`$[0] --help' for more information.]) ;;
- 
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_REQUIRE([LT_AC_PROG_SED])
--AC_CACHE_CHECK([$1], [$2],
--  [$2=no
--  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
--   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--   lt_compiler_flag="$3"
--   # Insert the option either (1) after the last *FLAGS variable, or
--   # (2) before a word containing "conftest.", or (3) at the end.
--   # Note that $ac_compile itself does not contain backslashes and begins
--   # with a dollar sign (not a hyphen), so the echo should work correctly.
--   # The option is referenced via a variable to avoid confusing sed.
--   lt_compile=`echo "$ac_compile" | $SED \
--   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
--   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
--   -e 's:$: $lt_compiler_flag:'`
--   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
--   (eval "$lt_compile" 2>conftest.err)
--   ac_status=$?
--   cat conftest.err >&AS_MESSAGE_LOG_FD
--   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
--   if (exit $ac_status) && test -s "$ac_outfile"; then
--     # The compiler can only warn and ignore the option if not recognized
--     # So say no if there are warnings other than the usual output.
--     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
--     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
--     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
--       $2=yes
--     fi
--   fi
--   $rm conftest*
--])
-+    *) AC_MSG_ERROR([unrecognized argument: $[1]
-+Try \`$[0] --help' for more information.]) ;;
-+  esac
-+  shift
-+done
- 
--if test x"[$]$2" = xyes; then
--    ifelse([$5], , :, [$5])
--else
--    ifelse([$6], , :, [$6])
-+if $lt_cl_silent; then
-+  exec AS_MESSAGE_FD>/dev/null
- fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--#                          [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
--  [$2=no
--   save_LDFLAGS="$LDFLAGS"
--   LDFLAGS="$LDFLAGS $3"
--   printf "$lt_simple_link_test_code" > conftest.$ac_ext
--   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
--     # The linker can only warn and ignore the option if not recognized
--     # So say no if there are warnings
--     if test -s conftest.err; then
--       # Append any errors to the config.log.
--       cat conftest.err 1>&AS_MESSAGE_LOG_FD
--       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
--       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
--       if diff conftest.exp conftest.er2 >/dev/null; then
--         $2=yes
--       fi
--     else
--       $2=yes
--     fi
--   fi
--   $rm conftest*
--   LDFLAGS="$save_LDFLAGS"
--])
-+_LTEOF
- 
--if test x"[$]$2" = xyes; then
--    ifelse([$4], , :, [$4])
--else
--    ifelse([$5], , :, [$5])
-+cat >>"$CONFIG_LT" <<_LTEOF
-+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-+_LTEOF
-+
-+cat >>"$CONFIG_LT" <<\_LTEOF
-+AC_MSG_NOTICE([creating $ofile])
-+_LT_OUTPUT_LIBTOOL_COMMANDS
-+AS_EXIT(0)
-+_LTEOF
-+chmod +x "$CONFIG_LT"
-+
-+# configure is writing to config.log, but config.lt does its own redirection,
-+# appending to config.log, which fails on DOS, as config.log is still kept
-+# open by configure.  Here we exec the FD to /dev/null, effectively closing
-+# config.log, so it can be properly (re)opened and appended to by config.lt.
-+if test "$no_create" != yes; then
-+  lt_cl_success=:
-+  test "$silent" = yes &&
-+    lt_config_lt_args="$lt_config_lt_args --quiet"
-+  exec AS_MESSAGE_LOG_FD>/dev/null
-+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-+  exec AS_MESSAGE_LOG_FD>>config.log
-+  $lt_cl_success || AS_EXIT(1)
- fi
--])# AC_LIBTOOL_LINKER_OPTION
--
-+])# LT_OUTPUT
- 
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
--  i=0
--  teststring="ABCD"
- 
--  case $build_os in
--  msdosdjgpp*)
--    # On DJGPP, this test can blow up pretty badly due to problems in libc
--    # (any single argument exceeding 2000 bytes causes a buffer overrun
--    # during glob expansion).  Even if it were fixed, the result of this
--    # check would be larger than it should be.
--    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
--    ;;
-+# _LT_CONFIG(TAG)
-+# ---------------
-+# If TAG is the built-in tag, create an initial libtool script with a
-+# default configuration from the untagged config vars.  Otherwise add code
-+# to config.status for appending the configuration named by TAG from the
-+# matching tagged config vars.
-+m4_defun([_LT_CONFIG],
-+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-+_LT_CONFIG_SAVE_COMMANDS([
-+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-+  m4_if(_LT_TAG, [C], [
-+    # See if we are running on zsh, and set the options which allow our
-+    # commands through without removal of \ escapes.
-+    if test -n "${ZSH_VERSION+set}" ; then
-+      setopt NO_GLOB_SUBST
-+    fi
- 
--  gnu*)
--    # Under GNU Hurd, this test is not required because there is
--    # no limit to the length of command line arguments.
--    # Libtool will interpret -1 as no limit whatsoever
--    lt_cv_sys_max_cmd_len=-1;
--    ;;
-+    cfgfile="${ofile}T"
-+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-+    $RM "$cfgfile"
- 
--  cygwin* | mingw*)
--    # On Win9x/ME, this test blows up -- it succeeds, but takes
--    # about 5 minutes as the teststring grows exponentially.
--    # Worse, since 9x/ME are not pre-emptively multitasking,
--    # you end up with a "frozen" computer, even though with patience
--    # the test eventually succeeds (with a max line length of 256k).
--    # Instead, let's just punt: use the minimum linelength reported by
--    # all of the supported platforms: 8192 (on NT/2K/XP).
--    lt_cv_sys_max_cmd_len=8192;
--    ;;
-+    cat <<_LT_EOF >> "$cfgfile"
-+#! $SHELL
- 
--  amigaos*)
--    # On AmigaOS with pdksh, this test takes hours, literally.
--    # So we just punt and use a minimum line length of 8192.
--    lt_cv_sys_max_cmd_len=8192;
--    ;;
-+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+_LT_COPYING
-+_LT_LIBTOOL_TAGS
- 
--  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
--    # This has been around since 386BSD, at least.  Likely further.
--    if test -x /sbin/sysctl; then
--      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
--    elif test -x /usr/sbin/sysctl; then
--      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
--    else
--      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
--    fi
--    # And add a safety zone
--    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
--    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
--    ;;
-+# ### BEGIN LIBTOOL CONFIG
-+_LT_LIBTOOL_CONFIG_VARS
-+_LT_LIBTOOL_TAG_VARS
-+# ### END LIBTOOL CONFIG
- 
--  interix*)
--    # We know the value 262144 and hardcode it with a safety zone (like BSD)
--    lt_cv_sys_max_cmd_len=196608
--    ;;
-+_LT_EOF
- 
--  osf*)
--    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
--    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
--    # nice to cause kernel panics so lets avoid the loop below.
--    # First set a reasonable default.
--    lt_cv_sys_max_cmd_len=16384
--    #
--    if test -x /sbin/sysconfig; then
--      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
--        *1*) lt_cv_sys_max_cmd_len=-1 ;;
--      esac
--    fi
--    ;;
--  sco3.2v5*)
--    lt_cv_sys_max_cmd_len=102400
--    ;;
--  sysv5* | sco5v6* | sysv4.2uw2*)
--    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
--    if test -n "$kargmax"; then
--      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
--    else
--      lt_cv_sys_max_cmd_len=32768
--    fi
--    ;;
--  *)
--    # If test is not a shell built-in, we'll probably end up computing a
--    # maximum length that is only half of the actual maximum length, but
--    # we can't tell.
--    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
--    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
--	       = "XX$teststring") >/dev/null 2>&1 &&
--	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
--	    lt_cv_sys_max_cmd_len=$new_result &&
--	    test $i != 17 # 1/2 MB should be enough
--    do
--      i=`expr $i + 1`
--      teststring=$teststring$teststring
--    done
--    teststring=
--    # Add a significant safety factor because C++ compilers can tack on massive
--    # amounts of additional arguments before passing them to the linker.
--    # It appears as though 1/2 is a usable value.
--    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+  case $host_os in
-+  aix3*)
-+    cat <<\_LT_EOF >> "$cfgfile"
-+# AIX sometimes has problems with the GCC collect2 program.  For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+  COLLECT_NAMES=
-+  export COLLECT_NAMES
-+fi
-+_LT_EOF
-     ;;
-   esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
--  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
--  AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
- 
-+  _LT_PROG_LTMAIN
- 
--# _LT_AC_CHECK_DLFCN
--# ------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
-+  # We use sed instead of cat because bash on DJGPP gets confused if
-+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-+  # text mode, it properly converts lines to CR/LF.  This bash problem
-+  # is reportedly fixed, but why not run on old versions too?
-+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-+    || (rm -f "$cfgfile"; exit 1)
- 
-+  _LT_PROG_XSI_SHELLFNS
- 
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ---------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
--  [$4]
--else
--  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
--  lt_status=$lt_dlunknown
--  cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
-+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-+    || (rm -f "$cfgfile"; exit 1)
- 
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
-+  mv -f "$cfgfile" "$ofile" ||
-+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+  chmod +x "$ofile"
-+],
-+[cat <<_LT_EOF >> "$ofile"
- 
--#include <stdio.h>
-+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-+dnl in a comment (ie after a #).
-+# ### BEGIN LIBTOOL TAG CONFIG: $1
-+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-+# ### END LIBTOOL TAG CONFIG: $1
-+_LT_EOF
-+])dnl /m4_if
-+],
-+[m4_if([$1], [], [
-+    PACKAGE='$PACKAGE'
-+    VERSION='$VERSION'
-+    TIMESTAMP='$TIMESTAMP'
-+    RM='$RM'
-+    ofile='$ofile'], [])
-+])dnl /_LT_CONFIG_SAVE_COMMANDS
-+])# _LT_CONFIG
-+
-+
-+# LT_SUPPORTED_TAG(TAG)
-+# ---------------------
-+# Trace this macro to discover what tags are supported by the libtool
-+# --tag option, using:
-+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-+AC_DEFUN([LT_SUPPORTED_TAG], [])
-+
-+
-+# C support is built-in for now
-+m4_define([_LT_LANG_C_enabled], [])
-+m4_define([_LT_TAGS], [])
- 
--#ifdef RTLD_GLOBAL
--#  define LT_DLGLOBAL		RTLD_GLOBAL
--#else
--#  ifdef DL_GLOBAL
--#    define LT_DLGLOBAL		DL_GLOBAL
--#  else