SWCONFIG and AR8216_PHY are not needed with DSA. Legacy PTYs are also
not needed. Moreover AR8216_PHY causes a 16 second stall at boot time.

Backport qca8k regmap bulk read/write changes and fdb fixes and add a
kernel 5.15 specific workaround for Turris 1.x (which disables switch
internal PHY MDIO access over management ethernet, since it causes
conflicts with WAN PHY, resulting in unusable WAN).

This should fix the bug
  Micrel KSZ9031 Gigabit PHY mdio@ffe24520:07: phy_poll_reset failed: -110
on Turris 1.x with kernel 5.15.

This ports commit
  f4d949b40485 ("generic: 5.15: backport qca8k fixup for mgmt and mdio read/write")
from upstream OpenWRT. The commit backports 5 qca8k patches to
  target/linux/generic/backport-5.15

The patches are currently backported into
  target/linux/mpc85xx/patches-5.15
by our patch
  mpc85xx: add patches from OpenWrt to improve switch

So this basically renames and moves the patches into another directory.

Take the 8 backported Turris Omnia LED patches from
target/mvebu/patches-5.15 and move them to target/generic/backport-5.15
as they are in upstream OpenWRT.

Rename the patch to conform to the name generated by
  git format-patch

For details see the included patch serie or the github repo:
https://github.com/turris-cz/easycwmp

Last year we prepared U-Boot so that when the turris-omnia-mcu driver is
finally in kernel, U-Boot will, before loading kernel, fixup Omnia's
device-tree by injecting reset-gpios to PCIe nodes (for board revisions
32+).

Now that the device-tree contains the node with "cznic,turris-omnia-mcu"
compatible, U-Boot does exactly that. But the problem is that the
pci-mvebu driver with reset-gpios available fails to enumerate the
ath10k card WLE900VX.

Rename the compatible of the driver to "cznic,turris-omnia-ctrl" so that
U-Boot does not inject the reset-gpios for now.

On WAN side automatically request prefix delegation. On LAN side use
eui64 as static IPv6 identifier (::1 is an easy target) and assign also
fe80::1 to the interface as it is common IPv6 address for a default
gateway.

Marek Behun authored 1 year ago and Michal Hrusecky committed 1 year ago

Update Turris Omnia LED driver patches from upstream, and add pending
patches to support Turris Omnia MCU.

For details see the patch.

We need lighttpd-https-cert enabled in order to get lighttpd up and
running and we have updated default configuration of mwan3 to work with
automatically configured 4G/5G modems, so we shouldn't hesitate to
enable it as well.

Kernel 5.15 updated to version 5.15.135 and 5.10 updated to 5.10.198.

Autoreconf was dropped upstream, so we no longer need this patch.

Somebody again started updating same package as we in out-of-maintenance
branch of OpenWrt, so we need to rebase.

Upgrade openssl to latest version 1.1.1w and follow upstream OpenWrt 22.03 This
upgrade fixing CVE-2023-4807

Bump numpy to version 1.24.3 and added two patches.  First patch used for
setuptools and wheel pinned in pyproject.toml are older than the versions
available in the packages repo. (8d331953f34a1ed231cb24893c68606813c36824)
Second patch is for stops numpy from reading .numpy-site.cfg in the build
user's home directory. (3cee44d88837b5679a96f0155205ec15883d5aef)
Added openblas support. (5cafab68ff5bddf5470e7674bb0bf8d0415e8804)
Upgrade Cython to 0.29.32 (5b9a66cd7c437ab9d0c1e2b466739ec060f6e9d6)

Autoreconfiguring wget can result in broken setup with
GNULIBHEADERS_OVERRIDE_WINT_T not being set. This might be caused by
something being too old, haven't dug deep enough to find the root cause,
but for now using upstream generated configure and Makefile will help us
keep going.

After update of curl, perl-www-curl stopped to compile. The newer
versions have some incompatibilities. This patch ensures compatibility.
Taken from openwrt/packages commit: f51a784a83e4b5e4068de6e0c4c6b86b479d1144

Update hashes in patch for new versions

Remove old wolfssl patches, follow openwrt upstream

Update curl to the latest version 8.3.0, fixes CVE-2023-38039

Replaced by php8-mod-sodium.

In openwrt-21.02 php8 does not include sodium extensions, which are used by
some other packages. This is a backport from openwrt packages
repository.
Commit with the changes in openwrt: da7f305f0e3184900bb0643d2875361e4feb62d2

Updating Samba to the latest release fixing even some security issues.

Although the hash was changed, the kernel version wasn't so fixing it
now.

For details see respected patches, but long story short, this updates
Samba to the latest version making sure we have all the security
patches.

In newer kernels, vxlan module is found in different path, changing it
to the new path.

Manually rebased:
	backport-5.15/346-v5.18-01-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch
	backport-5.15/603-v5.19-page_pool-Add-recycle-stats-to-page_pool_put_page_bu.patch
	pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch*

Removed upstreamed:
	backport-5.15/705-12-v6.0-net-dsa-mt7530-rework-mt753-01-_setup.patch[2]
	backport-5.15/703-10-v5.16-net-dsa-introduce-helpers-for-iterating-through-port.patch[4]

Michal Hrusecky authored 1 year ago and Michal Vasilek committed 1 year ago

D-Bus is a local only bus and thus it makes sense to enable it by
default when installed and it is a dependency of ModemManager which is
the easiest way to setup various LTE modems.

Michal Hrusecky authored 1 year ago and Michal Vasilek committed 1 year ago

Serial driver option is missing IDs for Neoway N75-EA, so adding it and
thus making this card work.