DSA + null pointer dereference
I'm hitting a bug in networking subsystem.
My configuration is to have all lanX + eth0 bridged, three VLANs tagged over eth0, lanX ports are access ports thus traffic is untagged. The bug prevents to start the system with kernel 5.4.171 but allows to boot me the 5.4.150.
In 5.4.150 the bug hit when working with network (like service network restart
)
OS TOS6.0 in HBD branch, Linux version 5.4.171 but happening also on 5.4.150
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.171 (packaging@turris.cz) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16474+63-97b95ef8b9)) #0 SMP Mon Jan 24 11:33:10 2022
[ 0.000000] Machine model: CZ.NIC Turris Mox Board
[ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
[ 0.000000] printk: bootconsole [ar3700_uart0] enabled
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 16 pages/cpu s28440 r8192 d28904 u65536
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128512
[ 0.000000] Kernel command line: earlyprintk console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 mangled_fs=btrfs root=PARTUUID=8b991174-01 rootflags=commit=5,subvol=@ rootwait rw cfg80211.freg=
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 491508K/522240K available (8766K kernel code, 498K rwdata, 2164K rodata, 512K init, 297K bss, 30732K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 192 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
[ 0.000000] random: get_random_bytes called from start_kernel+0x354/0x4bc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
[ 0.008436] Console: colour dummy device 80x25
[ 0.012953] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000)
[ 0.023593] pid_max: default: 32768 minimum: 301
[ 0.028445] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.035901] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.045106] ASID allocator initialised with 32768 entries
[ 0.050690] rcu: Hierarchical SRCU implementation.
[ 0.055929] smp: Bringing up secondary CPUs ...
[ 0.060943] Detected VIPT I-cache on CPU1
[ 0.060972] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
[ 0.061007] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.061095] smp: Brought up 1 node, 2 CPUs
[ 0.083152] SMP: Total of 2 processors activated.
[ 0.087986] CPU features: detected: 32-bit EL0 Support
[ 0.093276] CPU features: detected: CRC32 instructions
[ 0.098596] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.107168] CPU: All CPU(s) started at EL2
[ 0.111380] alternatives: patching kernel code
[ 0.116783] devtmpfs: initialized
[ 0.122800] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.132891] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.139942] xor: measuring software checksum speed
[ 0.244840] 8regs : 1979.200 MB/sec
[ 0.344866] 32regs : 2270.400 MB/sec
[ 0.444898] arm64_neon: 2002.400 MB/sec
[ 0.449116] xor: using function: 32regs (2270.400 MB/sec)
[ 0.454678] pinctrl core: initialized pinctrl subsystem
[ 0.460852] NET: Registered protocol family 16
[ 0.465725] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.472765] cpuidle: using governor ladder
[ 0.477179] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.499902] cryptd: max_cpu_qlen set to 1000
[ 0.505544] raid6: using algorithm neonx8 gen() 0 MB/s
[ 0.510756] raid6: .... xor() 0 MB/s, rmw enabled
[ 0.515657] raid6: using neon recovery algorithm
[ 0.521309] SCSI subsystem initialized
[ 0.526479] usbcore: registered new interface driver usbfs
[ 0.532106] usbcore: registered new interface driver hub
[ 0.537606] usbcore: registered new device driver usb
[ 0.544292] clocksource: Switched to clocksource arch_sys_counter
[ 0.559478] thermal_sys: Registered thermal governor 'step_wise'
[ 0.559752] NET: Registered protocol family 2
[ 0.570453] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.579216] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.587785] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.595759] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.603124] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.609725] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.616386] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.623673] NET: Registered protocol family 1
[ 0.628103] PCI: CLS 0 bytes, default 64
[ 0.632699] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.645056] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.656168] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.662103] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.673870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.681746] io scheduler bfq registered
[ 0.691485] mv_xor d0060900.xor: Marvell shared XOR driver
[ 0.754902] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.824891] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.832912] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.841647] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.851572] loop: module loaded
[ 0.854754] Loading iSCSI transport class v2.0-870.
[ 0.866524] random: fast init done
[ 0.875114] spi-nor spi0.0: w25q64dw (8192 Kbytes)
[ 0.880175] 5 fixed-partitions partitions found on MTD device spi0.0
[ 0.886652] Creating 5 MTD partitions on "spi0.0":
[ 0.891567] 0x000000000000-0x000000020000 : "secure-firmware"
[ 0.898499] 0x000000020000-0x000000180000 : "a53-firmware"
[ 0.904952] 0x000000180000-0x000000190000 : "u-boot-env"
[ 0.911158] 0x000000190000-0x0000007f0000 : "Rescue system"
[ 0.917755] 0x0000007f0000-0x000000800000 : "dtb"
[ 0.923692] moxtet spi0.1: Found MOX A (CPU) module
[ 0.928676] moxtet spi0.1: Found MOX E (8 port switch) module
[ 0.934571] moxtet spi0.1: Found MOX C (4 port switch) module
[ 0.941576] libphy: Fixed MDIO Bus: probed
[ 0.946444] libphy: orion_mdio_bus: probed
[ 0.951647] mv88e6085 d0032004.mdio-mii:10: switch 0x1900 detected: Marvell 88E6190, revision 1
[ 0.975111] libphy: mdio: probed
[ 1.019437] mv88e6085 d0032004.mdio-mii:02: switch 0x3400 detected: Marvell 88E6141, revision 0
[ 1.039312] libphy: mdio: probed
[ 1.061518] mvneta d0030000.ethernet eth0: Using device tree mac address d8:58:d7:00:ba:62
[ 1.070338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.077025] ehci-pci: EHCI PCI platform driver
[ 1.081611] ehci-platform: EHCI generic platform driver
[ 1.087108] ehci-orion: EHCI orion driver
[ 1.091347] orion-ehci d005e000.usb: EHCI Host Controller
[ 1.096867] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
[ 1.104736] orion-ehci d005e000.usb: irq 15, io mem 0xd005e000
[ 1.134271] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
[ 1.140816] hub 1-0:1.0: USB hub found
[ 1.144657] hub 1-0:1.0: 1 port detected
[ 1.149538] usbcore: registered new interface driver usb-storage
[ 1.155976] i2c /dev entries driver
[ 1.160387] armada_37xx_wdt d0008300.watchdog: Initial timeout 120 sec
[ 1.167707] sdhci: Secure Digital Host Controller Interface driver
[ 1.173993] sdhci: Copyright(c) Pierre Ossman
[ 1.178642] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.184767] xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
[ 1.190855] xenon-sdhci d00d8000.sdhci: Got CD GPIO
[ 1.197690] NET: Registered protocol family 10
[ 1.203096] Segment Routing with IPv6
[ 1.206889] NET: Registered protocol family 17
[ 1.211432] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.224856] 8021q: 802.1Q VLAN Support v1.8
[ 1.230959] Btrfs loaded, crc32c=crc32c-generic
[ 1.237840] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0, base_baud = 1562500) is a mvebu-uart
[ 1.247318] printk: console [ttyMV0] enabled
[ 1.247318] printk: console [ttyMV0] enabled
[ 1.256054] printk: bootconsole [ar3700_uart0] disabled
[ 1.256054] printk: bootconsole [ar3700_uart0] disabled
[ 1.268108] pxa2xx-i2c d0011000.i2c: missing pinmux recovery information: -549249783680 -19
[ 1.279591] rtc-ds1307 0-006f: registered as rtc0
[ 1.284554] i2c i2c-0: PXA I2C adapter
[ 1.289288] mv88e6085 d0032004.mdio-mii:10: switch 0x1900 detected: Marvell 88E6190, revision 1
[ 1.312632] libphy: mdio: probed
[ 1.358124] mvneta d0040000.ethernet eth1: Using device tree mac address d8:58:d7:00:ba:63
[ 1.368332] xhci-hcd d0058000.usb: xHCI Host Controller
[ 1.373745] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
[ 1.381508] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x0000000000010090
[ 1.390987] xhci-hcd d0058000.usb: irq 14, io mem 0xd0058000
[ 1.397486] hub 2-0:1.0: USB hub found
[ 1.401382] hub 2-0:1.0: 1 port detected
[ 1.405656] xhci-hcd d0058000.usb: xHCI Host Controller
[ 1.411053] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
[ 1.418815] xhci-hcd d0058000.usb: Host supports USB 3.0 SuperSpeed
[ 1.425361] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.434165] hub 3-0:1.0: USB hub found
[ 1.438127] hub 3-0:1.0: 1 port detected
[ 1.442883] xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
[ 1.480176] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
[ 1.488315] xenon-sdhci d00d8000.sdhci: Got CD GPIO
[ 1.524478] mmc1: SDHCI controller on d00d8000.sdhci [d00d8000.sdhci] using ADMA
[ 1.567880] Turris Mox serial number 0000000D300027E5
[ 1.573112] board version 22
[ 1.577074] burned RAM size 512 MiB
[ 1.697806] random: crng init done
[ 1.698066] mv88e6085 d0032004.mdio-mii:10: switch 0x1900 detected: Marvell 88E6190, revision 1
[ 1.859338] libphy: mdio: probed
[ 1.907788] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.915652] mmcblk1: mmc1:aaaa SA16G 14.8 GiB
[ 1.922123] mmcblk1: p1
[ 2.076521] mv88e6085 d0032004.mdio-mii:10: Setting CPU port as port 9
[ 2.726170] mv88e6085 d0032004.mdio-mii:10 lan1 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:01] driver [Marvell 88E6390 Family] (irq=83)
[ 2.746798] mv88e6085 d0032004.mdio-mii:10 lan2 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:02] driver [Marvell 88E6390 Family] (irq=84)
[ 2.767425] mv88e6085 d0032004.mdio-mii:10 lan3 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:03] driver [Marvell 88E6390 Family] (irq=85)
[ 2.788056] mv88e6085 d0032004.mdio-mii:10 lan4 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:04] driver [Marvell 88E6390 Family] (irq=86)
[ 2.808705] mv88e6085 d0032004.mdio-mii:10 lan5 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:05] driver [Marvell 88E6390 Family] (irq=87)
[ 2.829325] mv88e6085 d0032004.mdio-mii:10 lan6 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:06] driver [Marvell 88E6390 Family] (irq=88)
[ 2.849944] mv88e6085 d0032004.mdio-mii:10 lan7 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:07] driver [Marvell 88E6390 Family] (irq=89)
[ 2.870578] mv88e6085 d0032004.mdio-mii:10 lan8 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@10!mdio:08] driver [Marvell 88E6390 Family] (irq=90)
[ 2.895142] mv88e6085 d0032004.mdio-mii:10: configuring for inband/2500base-x link mode
[ 2.911034] mv88e6085 d0032004.mdio-mii:10: configuring for inband/2500base-x link mode
[ 2.973993] mv88e6085 d0032004.mdio-mii:02: Setting CPU port as port 5
[ 2.979541] mv88e6085 d0032004.mdio-mii:10: Link is Up - 2.5Gbps/Full - flow control off
[ 3.547347] mv88e6085 d0032004.mdio-mii:02 lan9 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch1@2!mdio:11] driver [Marvell 88E6341 Family] (irq=57)
[ 3.567895] mv88e6085 d0032004.mdio-mii:02 lan10 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch1@2!mdio:12] driver [Marvell 88E6341 Family] (irq=58)
[ 3.588529] mv88e6085 d0032004.mdio-mii:02 lan11 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch1@2!mdio:13] driver [Marvell 88E6341 Family] (irq=59)
[ 3.609195] mv88e6085 d0032004.mdio-mii:02 lan12 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch1@2!mdio:14] driver [Marvell 88E6341 Family] (irq=60)
[ 3.632066] mv88e6085 d0032004.mdio-mii:02: configuring for inband/2500base-x link mode
[ 3.656692] DSA: tree 0 setup
[ 3.661164] rtc-ds1307 0-006f: setting system clock to 2022-01-24T15:32:07 UTC (1643038327)
[ 3.681001] mv88e6085 d0032004.mdio-mii:02: Link is Up - 2.5Gbps/Full - flow control off
[ 3.698745] squashfs: Unknown parameter 'commit'
[ 3.706559] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.714023] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 1th superblock
[ 3.722954] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.730446] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 2th superblock
[ 3.742884] BTRFS: device fsid e74290ca-40f3-481e-a9ca-6637fd51032e devid 1 transid 7940 /dev/root
[ 3.753981] BTRFS info (device mmcblk1p1): flagging fs with big metadata feature
[ 3.761675] BTRFS info (device mmcblk1p1): disk space caching is enabled
[ 3.768593] BTRFS info (device mmcblk1p1): has skinny extents
[ 3.787995] BTRFS info (device mmcblk1p1): enabling ssd optimizations
[ 3.802714] VFS: Mounted root (btrfs filesystem) on device 0:15.
[ 3.810138] devtmpfs: mounted
[ 3.813703] Freeing unused kernel memory: 512K
[ 3.854522] Run /sbin/init as init process
[ 3.945131] init: Console is alive
[ 3.948873] init: - watchdog -
[ 4.312618] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.336531] ehci-fsl: Freescale EHCI Host controller driver
[ 4.345709] usbcore: registered new interface driver uas
[ 4.351446] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.360684] init: - preinit -
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.560101] mount_root: mounting /dev/root
[ 6.565875] BTRFS info (device mmcblk1p1): disk space caching is enabled
[ 6.678406] BTRFS info (device mmcblk1p1): devid 1 device path /dev/root changed to /dev/mmcblk1p1 scanned by mount (1235)
[ 6.698834] urandom-seed: Seeding with /etc/urandom.seed
Scanning for Btrfs filesystems
[ 6.931901] procd: - early -
[ 6.935014] procd: - watchdog -
[ 7.500634] procd: - watchdog -
[ 7.505483] procd: - ubus -
[ 7.561375] procd: - init -
Please press Enter to activate this console.
[ 7.743730] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.763729] zram: Added device: zram0
[ 7.775807] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 7.821555] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
[ 7.829459] Backport generated by backports.git v5.10.85-1-0-gf988973f
[ 7.869010] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.877264] GACT probability on
[ 7.881493] Mirror/redirect action on
[ 7.892620] u32 classifier
[ 7.895484] input device check on
[ 7.899266] Actions configured
[ 7.942733] Bluetooth: Core ver 2.22
[ 7.946690] NET: Registered protocol family 31
[ 7.951282] Bluetooth: HCI device and connection manager initialized
[ 7.957884] Bluetooth: HCI socket layer initialized
[ 7.962920] Bluetooth: L2CAP socket layer initialized
[ 7.968216] Bluetooth: SCO socket layer initialized
[ 7.975505] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.980993] Bluetooth: BNEP filters: protocol multicast
[ 7.986450] Bluetooth: BNEP socket layer initialized
[ 7.993582] Bridge firewalling registered
[ 8.007927] usbcore: registered new interface driver btusb
[ 8.027422] Bluetooth: HCI UART driver ver 2.3
[ 8.032016] Bluetooth: HCI UART protocol H4 registered
[ 8.037338] Bluetooth: HCI UART protocol BCSP registered
[ 8.042813] Bluetooth: HCI UART protocol ATH3K registered
[ 8.049898] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 8.056064] Bluetooth: HIDP socket layer initialized
[ 8.087246] Bluetooth: RFCOMM TTY layer initialized
[ 8.092304] Bluetooth: RFCOMM socket layer initialized
[ 8.097679] Bluetooth: RFCOMM ver 1.11
[ 8.106234] usbcore: registered new interface driver ums-alauda
[ 8.113480] usbcore: registered new interface driver ums-cypress
[ 8.120488] usbcore: registered new interface driver ums-datafab
[ 8.127490] usbcore: registered new interface driver ums-freecom
[ 8.134486] usbcore: registered new interface driver ums-isd200
[ 8.141355] usbcore: registered new interface driver ums-jumpshot
[ 8.148440] usbcore: registered new interface driver ums-karma
[ 8.155355] usbcore: registered new interface driver ums-sddr09
[ 8.162242] usbcore: registered new interface driver ums-sddr55
[ 8.169196] usbcore: registered new interface driver ums-usbat
[ 8.190633] xt_time: kernel timezone is -0000
[ 8.221720] PPP generic driver version 2.4.2
[ 8.227895] NET: Registered protocol family 24
[ 8.257139] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 9.877953] zram0: detected capacity change from 0 to 251658240
[ 9.944398] Adding 245756k swap on /dev/zram0. Priority:-2 extents:1 across:245756k SSDsc
[ 11.858684] mvneta d0030000.ethernet eth0: PHY [d0032004.mdio-mii:01] driver [Marvell 88E1510] (irq=POLL)
[ 11.872816] mvneta d0030000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 11.893911] br-lan: port 1(eth0) entered blocking state
[ 11.899417] br-lan: port 1(eth0) entered disabled state
[ 11.905318] device eth0 entered promiscuous mode
[ 11.910211] br-lan: port 1(eth0) entered blocking state
[ 11.915670] br-lan: port 1(eth0) entered listening state
[ 11.965709] mvneta d0040000.ethernet eth1: configuring for inband/2500base-x link mode
[ 11.982833] mv88e6085 d0032004.mdio-mii:10 lan1: configuring for phy/ link mode
[ 11.983565] mv88e6085 d0032004.mdio-mii:10: Link is Up - 2.5Gbps/Full - flow control off
[ 11.995309] 8021q: adding VLAN 0 to HW filter on device lan1
[ 12.141497] mvneta d0040000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control off
[ 12.169441] br-lan: port 2(lan1) entered blocking state
[ 12.174970] br-lan: port 2(lan1) entered disabled state
[ 12.192736] device lan1 entered promiscuous mode
[ 12.197589] device eth1 entered promiscuous mode
[ 12.520422] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 12.532827] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 12.540194] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.859346] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 12.872692] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
[ 12.881547] br-lan: port 1(eth0) entered disabled state
[ 12.891374] mv88e6085 d0032004.mdio-mii:02 lan10: configuring for phy/ link mode
[ 12.900401] 8021q: adding VLAN 0 to HW filter on device lan10
[ 13.065849] br-lan: port 3(lan10) entered blocking state
[ 13.071383] br-lan: port 3(lan10) entered disabled state
[ 13.082334] device lan10 entered promiscuous mode
[ 13.097059] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 13.117799] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 13.129704] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 13.141068] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 13.152665] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 13.466943] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 13.479122] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
[ 13.490462] mv88e6085 d0032004.mdio-mii:02 lan11: configuring for phy/ link mode
[ 13.499512] 8021q: adding VLAN 0 to HW filter on device lan11
[ 13.643915] br-lan: port 4(lan11) entered blocking state
[ 13.649434] br-lan: port 4(lan11) entered disabled state
[ 13.660836] device lan11 entered promiscuous mode
[ 13.676933] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 13.701870] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 13.713886] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 13.725405] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 13.737435] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 13.770012] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 13.795768] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
[ 13.812256] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 255
[ 13.826167] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 13.846913] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
[ 13.858231] mv88e6085 d0032004.mdio-mii:02 lan12: configuring for phy/ link mode
[ 13.868184] 8021q: adding VLAN 0 to HW filter on device lan12
[ 14.015367] br-lan: port 5(lan12) entered blocking state
[ 14.020858] br-lan: port 5(lan12) entered disabled state
[ 14.042078] device lan12 entered promiscuous mode
[ 14.062190] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 14.090144] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 14.109915] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 14.123934] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 14.150404] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 14.188882] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 14.218917] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
[ 14.239686] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 255
[ 14.259655] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 14.282224] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
[ 14.314829] mv88e6085 d0032004.mdio-mii:10 lan2: configuring for phy/ link mode
[ 14.336090] 8021q: adding VLAN 0 to HW filter on device lan2
[ 14.342264] br-lan: port 6(lan2) entered blocking state
[ 14.347743] br-lan: port 6(lan2) entered disabled state
[ 14.377112] device lan2 entered promiscuous mode
[ 14.421599] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 14.467015] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 14.492157] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 14.514869] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 14.557431] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 14.630826] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 14.657905] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
[ 14.682514] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 10
[ 14.704486] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 14.720580] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
bird: Started
[ 14.742016] mv88e6085 d0032004.mdio-mii:10 lan3: configuring for phy/ link mode
[ 14.758658] 8021q: adding VLAN 0 to HW filter on device lan3
[ 14.889317] br-lan: port 7(lan3) entered blocking state
[ 14.894755] br-lan: port 7(lan3) entered disabled state
[ 14.924281] device lan3 entered promiscuous mode
[ 14.952025] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 14.970379] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 14.989367] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 15.013811] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 15.032694] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 15.079901] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 15.096711] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
[ 15.117908] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 10
[ 15.138546] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 15.159011] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
[ 15.177189] mv88e6085 d0032004.mdio-mii:10 lan4: configuring for phy/ link mode
[ 15.195206] 8021q: adding VLAN 0 to HW filter on device lan4
[ 15.329586] br-lan: port 8(lan4) entered blocking state
[ 15.335044] br-lan: port 8(lan4) entered disabled state
[ 15.354449] device lan4 entered promiscuous mode
[ 15.378874] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 15.407941] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 15.431797] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 15.443022] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 15.455128] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 15.508599] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 15.529106] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
[ 15.541335] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 10
[ 15.553026] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 10
[ 15.569774] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 10
[ 15.592110] mv88e6085 d0032004.mdio-mii:10 lan5: configuring for phy/ link mode
[ 15.605570] 8021q: adding VLAN 0 to HW filter on device lan5
[ 15.740851] br-lan: port 9(lan5) entered blocking state
[ 15.746320] br-lan: port 9(lan5) entered disabled state
[ 15.779869] device lan5 entered promiscuous mode
[ 15.805025] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 15.825285] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 15.848502] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 15.869240] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 15.889206] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 15.917807] mv88e6085 d0032004.mdio-mii:10 lan6: configuring for phy/ link mode
[ 15.936241] 8021q: adding VLAN 0 to HW filter on device lan6
[ 16.075365] br-lan: port 10(lan6) entered blocking state
[ 16.080911] br-lan: port 10(lan6) entered disabled state
[ 16.120675] device lan6 entered promiscuous mode
[ 16.152522] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 16.170293] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 16.198950] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 16.217208] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 16.247677] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 16.282757] mv88e6085 d0032004.mdio-mii:10 lan7: configuring for phy/ link mode
[ 16.312213] 8021q: adding VLAN 0 to HW filter on device lan7
[ 16.449830] br-lan: port 11(lan7) entered blocking state
[ 16.455405] br-lan: port 11(lan7) entered disabled state
[ 16.500227] device lan7 entered promiscuous mode
[ 16.541088] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 16.566773] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 16.601068] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 16.618516] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 16.639824] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 16.668112] mv88e6085 d0032004.mdio-mii:10 lan8: configuring for phy/ link mode
[ 16.694842] 8021q: adding VLAN 0 to HW filter on device lan8
[ 16.850735] br-lan: port 12(lan8) entered blocking state
[ 16.856306] br-lan: port 12(lan8) entered disabled state
[ 16.903012] device lan8 entered promiscuous mode
[ 16.936395] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 16.960054] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 17.007556] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 17.041386] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 17.066883] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 17.111365] mv88e6085 d0032004.mdio-mii:02 lan9: configuring for phy/ link mode
[ 17.141968] 8021q: adding VLAN 0 to HW filter on device lan9
[ 17.284340] br-lan: port 13(lan9) entered blocking state
[ 17.289887] br-lan: port 13(lan9) entered disabled state
[ 17.351885] device lan9 entered promiscuous mode
[ 17.383470] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 17.422349] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 17.444227] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 1
[ 17.470185] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 1
[ 17.495487] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 1
[ 17.544907] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 17.588887] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
[ 17.618768] mv88e6085 d0032004.mdio-mii:10: p9: already a member of VLAN 255
[ 17.665200] mv88e6085 d0032004.mdio-mii:10: p10: already a member of VLAN 255
[ 17.727927] mv88e6085 d0032004.mdio-mii:02: p5: already a member of VLAN 255
updater[3594]: src/pkgupdate/main.c:144 (main): Detected existing journal. Trying to recover it.
updater[3594]: transaction.lua:230 (fun): Removing packages and leftover files
updater[3594]: transaction.lua:235 (fun): Running post-install and post-rm scripts
updater[3594]: src/lib/logging.c:201 (log_subproc_open): Running postinst of kernel
updater[3594]: src/lib/logging.c:201 (log_subproc_open): Running postinst of kmod-ikconfig
[ 22.515657] kmodloader: loading kernel modules from /etc/modules.d/*
[ 22.524994] kmodloader: done loading kernel modules from /etc/modules.d/*
updater[3594]: src/lib/logging.c:201 (log_subproc_open): Running postinst of kmod-nf-ipt
[ 22.707457] kmodloader: loading kernel modules from /etc/modules.d/*
[ 22.716650] kmodloader: done loading kernel modules from /etc/modules.d/*
updater[3594]: src/lib/logging.c:201 (log_subproc_open): Running postinst of kmod-nf-reject
[ 22.919269] kmodloader: loading kernel modules from /etc/modules.d/*
[ 22.947094] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.104056] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.113569] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.267583] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.277004] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.682253] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.706066] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.811998] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.846964] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.990733] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.016924] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 24.140778] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.166963] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 24.447355] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.466710] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 24.617381] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.636762] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 24.807761] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.827099] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 24.879725] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.889332] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.287094] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.296597] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.349599] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.359196] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.412324] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.421636] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.482703] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.492211] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.546103] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.555974] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.610141] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.619364] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.674072] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.683496] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.922152] kmodloader: loading kernel modules from /etc/modules.d/*
[ 26.931494] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.048255] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.057514] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.143715] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.152954] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.207463] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.217453] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.304926] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.314028] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.498622] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.507957] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.595127] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.605242] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 28.147755] device eth0 left promiscuous mode
[ 28.152422] br-lan: port 1(eth0) entered disabled state
[ 28.239560] device lan1 left promiscuous mode
[ 28.244307] br-lan: port 2(lan1) entered disabled state
[ 28.319662] device lan10 left promiscuous mode
[ 28.324501] br-lan: port 3(lan10) entered disabled state
[ 28.394576] device lan11 left promiscuous mode
[ 28.399375] br-lan: port 4(lan11) entered disabled state
[ 28.473037] device lan12 left promiscuous mode
[ 28.477898] br-lan: port 5(lan12) entered disabled state
[ 28.533566] device lan2 left promiscuous mode
[ 28.538332] br-lan: port 6(lan2) entered disabled state
[ 28.595308] device lan3 left promiscuous mode
[ 28.600006] br-lan: port 7(lan3) entered disabled state
[ 28.695964] device lan4 left promiscuous mode
[ 28.700685] br-lan: port 8(lan4) entered disabled state
[ 28.761768] device lan5 left promiscuous mode
[ 28.766487] br-lan: port 9(lan5) entered disabled state
[ 28.821033] device lan6 left promiscuous mode
[ 28.825806] br-lan: port 10(lan6) entered disabled state
[ 28.871041] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000040
[ 28.882139] Mem abort info:
[ 28.885072] ESR = 0x96000005
[ 28.888229] EC = 0x25: DABT (current EL), IL = 32 bits
[ 28.893708] SET = 0, FnV = 0
[ 28.896889] EA = 0, S1PTW = 0
[ 28.900127] Data abort info:
[ 28.903096] ISV = 0, ISS = 0x00000005
[ 28.907089] CM = 0, WnR = 0
[ 28.910156] user pgtable: 4k pages, 39-bit VAs, pgdp=000000001d108000
[ 28.916832] [0000000000000040] pgd=0000000000000000, pud=0000000000000000
[ 28.923847] Internal error: Oops: 96000005 [#1] SMP
[ 28.928877] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat ath9k xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat_ftp nf_nl
[ 28.929022] btintel br_netfilter bnep bluetooth ath9k_hw ath10k_pci ath10k_core ath sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact config
[ 29.095743] CPU: 1 PID: 2125 Comm: netifd Not tainted 5.4.171 #0
[ 29.101937] Hardware name: CZ.NIC Turris Mox Board (DT)
[ 29.107327] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 29.112281] pc : dsa_port_vlan_filtering+0x34/0x158
[ 29.117315] lr : dsa_switch_event+0x548/0x5f0
[ 29.121807] sp : ffffffc0112d39c0
[ 29.125222] x29: ffffffc0112d39c0 x28: ffffff801e5e8c80
[ 29.130703] x27: 0000000000000000 x26: ffffffc0112d3d80
[ 29.136184] x25: 0000000056000000 x24: 0000000000000015
[ 29.141662] x23: 0000000000000001 x22: ffffff801e60d098
[ 29.147142] x21: 0000000000000000 x20: ffffffc0112d3ab8
[ 29.152621] x19: 0000000000000000 x18: 0000000000000000
[ 29.158101] x17: 0000000000000000 x16: 0000000000000000
[ 29.163580] x15: 0000000000000000 x14: 0000000000000000
[ 29.169060] x13: 0000000000000000 x12: 0000000000000000
[ 29.174540] x11: 0000000000000000 x10: 0000000000000830
[ 29.180019] x9 : ffffffc0112d35b0 x8 : ffffff801e5e9510
[ 29.185498] x7 : ffffffc00f32a000 x6 : 0000000004dd957f
[ 29.190978] x5 : 0000000000000000 x4 : 0000000000000000
[ 29.196458] x3 : 0000000000000006 x2 : ffffffc0112d3a37
[ 29.201937] x1 : 0000000000000000 x0 : ffffff801e60db48
[ 29.207418] Call trace:
[ 29.209946] dsa_port_vlan_filtering+0x34/0x158
[ 29.214619] dsa_switch_event+0x548/0x5f0
[ 29.218758] notifier_call_chain+0x54/0x90
[ 29.222983] raw_notifier_call_chain+0x14/0x20
[ 29.227568] dsa_port_bridge_leave+0x54/0xc0
[ 29.231974] dsa_slave_netdevice_event+0xec/0x100
[ 29.236826] notifier_call_chain+0x54/0x90
[ 29.241051] raw_notifier_call_chain+0x14/0x20
[ 29.245641] call_netdevice_notifiers_info+0x34/0x78
[ 29.250764] netdev_upper_dev_unlink+0x84/0x118
[ 29.255441] del_nbp+0x1b4/0x2c8
[ 29.258771] br_del_if+0x3c/0x150
[ 29.262190] add_del_if+0x58/0x90
[ 29.265608] br_dev_ioctl+0x5c/0x1b8
[ 29.269299] dev_ifsioc+0x360/0x480
[ 29.272897] dev_ioctl+0x114/0x3a8
[ 29.276409] sock_ioctl+0x41c/0xda8
[ 29.280008] do_vfs_ioctl+0xb8/0x1008
[ 29.283785] ksys_ioctl+0x44/0x90
[ 29.287202] __arm64_sys_ioctl+0x1c/0x1c0
[ 29.291342] el0_svc_handler+0xd4/0x130
[ 29.295299] el0_svc+0x8/0x208
[ 29.298457] Code: a8c37bfd d65f03c0 a90153f3 f9401813 (f9402261)
[ 29.304744] ---[ end trace 4bb72a932bbdde33 ]---
[ 29.309505] Kernel panic - not syncing: Fatal exception
[ 29.314898] SMP: stopping secondary CPUs
[ 29.318952] Kernel Offset: disabled
[ 29.322548] CPU features: 0x0002,00002008
[ 29.326677] Memory Limit: none
[ 29.329826] Rebooting in 3 seconds..
My network configuration:
root@sw-mox:/# cat /etc/config/network
config interface 'loopback'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
option device 'lo'
config globals 'globals'
option ula_prefix 'fd50:3520:27cd::/48'
config interface 'lan'
option proto 'static'
option _turris_mode 'managed'
option delegate '0'
option device 'br-lan.1'
list ipaddr '192.168.23.2/24'
option gateway '192.168.23.1'
config device
option type 'bridge'
option name 'br-lan'
option macaddr 'd8:58:d7:00:ba:63'
option stp '1'
option bridge_empty '1'
list ports 'eth0'
list ports 'lan1'
list ports 'lan10'
list ports 'lan11'
list ports 'lan12'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
list ports 'lan5'
list ports 'lan6'
list ports 'lan7'
list ports 'lan8'
list ports 'lan9'
config bridge-vlan
option device 'br-lan'
option vlan '1'
list ports 'eth0:t'
config bridge-vlan
option device 'br-lan'
option vlan '10'
list ports 'eth0:t'
list ports 'lan1:u*'
list ports 'lan2:u*'
list ports 'lan3:u*'
list ports 'lan4:u*'
config bridge-vlan
option device 'br-lan'
option vlan '255'
list ports 'eth0:t'
list ports 'lan9:u*'
list ports 'lan10:u*'
list ports 'lan11:u*'
list ports 'lan12:u*'